|
|
 |
|
|
10W 4:1 wide Input, Encapsulated, DIP16, PCB Mount DC-DC Converters Save 50% of PCB Area
The wide input JTR10 series converts nominal 12/24 or 24/48VDC inputs to a fixed voltage between 3.3 & 30VDC. At 48W/in³ the DIP16 housing doubles the power density of the typical 10W DIP24 packages currently used.
Available in two wide input 4:1 ranges: 9.0 to 36VDC for a 12 or 24VDC nominal supply; 18 to 75VDC for a 24 or 48VDC nominal supply. The regulated output is offered in four single and two dual output voltages: 3.3; 5.0; 12; 15; ±12 & ±15VDC, the dual output versions could also be used to provide a single 24VDC or 30VDC output. For single output models, the output voltage is trimmable ±10% by external resistor.
All models are high efficiency, up to 87%, there is no minimum load requirement, no-load current consumption is: 7mA (48V input models); 10mA (24V input models). The modules are fully protected against input undervoltage, short circuit and overload conditions.
Potted with UL94V-0 epoxy in a DIP16 copper case with a non-conductive UL94V-0 plastic base, measuring 0.94” x 0.54” x 0.41” (23.8 x 13.7 x 10.3 mm), the converters are convection cooled, with an operating temperature range of -40°C to +85°C (3.3 & 5.0V models to +80°C) and full power available to +70°C (3.3 & 5.0V models to +55°C). The maximum operating altitude is 5000 meters.
The JTR10 series have the following approvals: EN55032 class A for EMC conducted & radiated emissions with no external components; EN61000-4-2,3,4,5,6,8 for EMC immunity; Safety approvals: IEC/UL/cUL 62368-1 (pending) (ITE); Isolation is 1.5kVDC input/output. The calculated MTBF is greater than 500 khrs (MIL-HDBK-217F, +25°C GB).
The 10W JTR10 in its DIP16 package provides a significant reduction in size over the previous 10W DIP24 models. Suitable for ITE/industrial equipment, they are typically used in systems for: Portable & battery powered equipment; Communication systems; Robotics & many other applications.
• Regulated single outputs from 3.3 to 30VDC, dual outputs ±12 & ±15VDC
• Wide 4:1 DC input range 9.0 to 36 or 18 to 75VDC
• DIP16 metal case
• Output voltage trim ±10% (single output models)
• High efficiency up to 87%
• IEC/UL/cUL 62368-1 safety approvals (pending)
• Complies with EN55032 class A with no external components
• Input undervoltage, short circuit & overload protection
• 1.5kVDC input/output isolation
• Convection cooled
• -40°C to +85°C operating temperature
• Full power to +70°C
• MTBF >500 khrs (MIL-HDBK-217F, +25°C GB)
• 3 year warranty
All standard models are now available from stock.
https://www.xppower.com/Product/JTR10-Series
|
|
|
|
|
|
|
|
|
 |
|
|
|
